Sealant Tape TT-210-Y (210 ºC)

TT-210-Y is a low cost, high temperature multipurpose sealant. Easily removes from metal or composite tooling. It is suitable for curing applications up to 210ºC

ADVANTAGE

• Good adhesion to flashbreaker tapes and most metal and composite tools.
• Excellent UV resistance
• No fumes, free of solvents and harmful substances
• To cure at temperatures up to 210 ° C
• Water resistant
• No hardening, remains flexible throughout life

TECHNICAL DATA

Compression 50%: 125 kN / m2
Bond strength:> 3 N / cm
Density: 1.60 g / cm3 DS / ISO 2781A
Service temperature range: -30 - + 210 ºC
Yellow color

3mm x 12mm x 15m / roll

NOTES

• TT-210-Y is supplied as a 3mm x 12mm preformed strip on silicone paper.
• Application temperature> 5 ° C (15 ° C - 25 ° C recommended)
• Surface preparation: Mounting surfaces must be clean, dry, and free of dust, grease, and other material debris. Make sure the surface is dry before applying the caulk.
• Application: Apply by hand directly from the roll. Press firmly against the surface of the mold, remove the protective paper and place the vacuum film on top and while firmly pressing the empty film until vacuum tightness is achieved.
• Shelf life storage: Maximum 2 years from the date of manufacture under normal storage conditions, in a dry place at normal room temperature 22ºC. Do not store near heat sources, as the protective paper can be difficult to remove while the product is hot. It must be stored flat in the original packaging.
• Disposal: The product is not biodegradable.

Type of supply

TT-210-Y Sealant Tape x 1 roll, supplied in cardboard box

TT-210-Y Sealant Tape x 20 rolls box, supplied in cardboard box