Sphere.core SBC 6 mm for Hand lay-up

A pre-compressed, stitch-bonded glass fibre material which is volumised by embedding thermoplastic microspheres. Particularly suitable for wet-on-wet process for producing both stable and light homogeneous laminates at the same time. The excellent characteristics result from the complete impregnation with ca. 40% by volume of the same resin used to laminate the skin layers.

This sandwich material which can be laminated substitutes balsa, PVC foam material and other core materials but has the advantage of being able to adjust to the mould three-dimensionally. This product is available in 6 mm, 8 mm and 10 mm thicknesses.

Suitable in combination with any thermosetting resin: polyester, vinyl ester, urethane-acrylic (Crestapol) and epoxies.
Recommended for hand lay-up and vacuum bagging processes.

Weight per m2: 200 g
Roll width: 127 cm

Type of supply

Spherecore SBC 6 mm x 1 linear m (1,27 m2), supplied rolled in cardboard box

Spherecore SBC 6 mm x 5 linear m (6,35 m2), supplied rolled in cardboard box

Spherecore SBC 6 mm x 40 linear m (50,8 m2), supplied wrapped in plastic film