PVC Foam Divinycell H80 30 Q103 for infusion, 30 mm thickness

Divinycell H80 30 Q103 is a PVC foam supplied with two different and combined finishing patterns: GSWC30 is a grid scored material in two directions, which makes it formable and flexible for use in curved molds or applications and GPC1 presents one side of the core grooved and perforated, while the other side has perforations only.

GCWC30 conforms and shapes itself, which in practise means that it evens out any irregularities on a previously laid laminate for instance.

GSWC30 is probably one of the most commonly used and appreciated finishes due to its flexibility and easy to use characteristics. The most common way to install grid scored materials in a curved mold is to allow the grid scores to close, in a concave mold -the cuts are facing the installer, therefore yielding the following benefits:

Typical measurements

Center-to-center: 30 mm

Depth (D): 2 mm from bottom of sheet

Width (W): 1.3 mm, U-shaped cut

Benefits

• Easy and robust to handle

• Multipurpose suitability

• Core bedding vacuum bonding

• Formable

Typical applications

• Blades

• Nacelles

• Hulls

• Superstructures

• Tanks

• Etc.

 is an attribute to our core materials, developed to make the infusion process reliable, fast and roobust on flat or slightly curved surfaces, while imprints on the surface are minimized. One side of the core is grooved and perforated, while the other side has perforations only.GPC1

Typical measurements

Center-to-center: 20 mm

Depth (D): 2 mm

Width (W): 2 mm

Diameter of perforation: 2 mm

Benefits

• Reduces cost

• Saves labor

• Bi process window

• Minimizing the risk of print throughs from the core

• Facilitating easy and fast lay-up of infusion strategy

Type of supply

PVC Foam Divinycell H80 30 Q103 for infusion x Sheet of 1.220 x 813 x 30 mm

PVC Foam Divinycell H80 30 Q103 for infusion x 10 sheets box of 1.220 x 813 x 30 mm (9.92 m2)