Resoltech 1450ALU 25/1453 Aluminium filled Casting Epoxy Resin

RESOLCOAT 1450T ALU25 is an aluminium filled epoxy casting system formulated to produce parts or moulds from a few mm to several cm thick. It is used to produce moulds and tooling plugs.

Resoltech 1450 ALU system combines ease of use, high thermal and mechanical properties as well as virtually no shrinkage. It offers a good chemical resistance and its high TG makes it an ideal product for phenolic resins parts production, thermoforming or any other highTG application were the mould will be subject to thermal shocks.

It usually used for casting, but may also be used for laminating glass reinforcements and powdered mats. Its good thermal conductivity makes the 1450 ALU a choice system for heatedmoulds & parts.

The minimum curing time before demolding: 12 hours at 60°C.

It’s TG of 130°C enables the realisation of high quality and performance parts as well as tooling for prepreg parts.

Gel time for 70ml of mixture (4 cm thickness) at 23ºC: 2h and 53 min

Mixing ratio by weight = 100:7, with hardener Resoltech 1453

Type of supply

Resoltech 1450ALU/1453 Aluminium filled Casting Epoxy Resin x 5kg + 350g

Resoltech 1450ALU/1453 Aluminium filled Casting Epoxy Resin x 30kg + 2,1kg