X-8 MEKP Catalyst (Luperox K1SN E Methylethylketone Peroxide 50%)
No reward points for this product.
Methyl Ethyl Ketone Peroxide Catalyst for unsaturated polyester and vinyl ester resins . It is generally added at 1,5% and 2.5% by weight rates to the resins.
Methyl Ethyl Ketone Peroxide Catalyst for unsaturated polyester and vinyl ester resins . It is generally added at 1,5% and 2.5% by weight rates to the resins.
Type of supply
Catalyst X -8 x 20 g, supplied in plastic bottle
Catalyst X -8 x 100 g, supplied in plastic bottle
Catalyst X -8 x 0.5 kg, supplied in plastic bottle
Catalyst X -8 x 1 kg, supplied in plastic bottle
Catalyst X -8 x 5 kg, supplied in plastic keg
Catalyst X -8 x 10 kg, supplied in plastic keg
Catalyst X -8 x 25 kg, supplied in plastic keg
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR/DPD or GLS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR/DPD or GLS as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g. This exception is not applicable to peroxides.
In any case, drums bigger than 25 kg must be shipped by TXT or Dachser.
* Shippings to Portugal will be always carried by Torrestir