Tax incl. Tax excl.
Crystic Primecoat

Crystic Primecoat Polyester High Build

WGC0001P-5
0 Items
Product available with different options
€100.00
€121.00 Tax incl. €100.00 Tax excl.
Tax excluded

By buying this product you can collect up to 12 point points. Your cart will total 12 points that can be converted into a voucher of €1.20.

Crystic Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc.

Choose the type of supply
Application

Ratings and comments from our customers
( 5.0 / 5) - 6 feedback(s)
Display details of ratings

Crystic Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc.  It can be applied wet-on-wet up to a thickness of 1.5 mm in one operation without sagging or draining from vertical surfaces.  The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications.  Where higher gloss and/or hardness is required it can be surfaced with Crystic Glosscoat.

Test using DMTA was run and the tanδ Tg of the Primecoat (without any post-cure) was 74.85 ºC.

Type of supply

Crystic Primecoat (brush/roller) 1kg, with 20 g of MEKP catalyst

Crystic Primecoat (brush/roller) x 5 kg, with 100 g of MEKP catalyst

Crystic Primecoat (brush/roller) x 25 kg with 0.5 kg of MEKP catalyst

Crystic Primecoat (spray) x 1 kg, with 20 g of MEKP catalyst

Crystic Primecoat (spray) x 5 kg, with 100 g of MEKP catalyst

Crystic Primecoat (spray) x 25 kg, with 0.5 kg of MEKP catalyst

0 Items
8431252522231

ADR (DANGEROUS GOODS)

Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.

* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.

____________________________________________________

PRODUCT                                                                     

Polyvinyl and Isopropyl alcohol ................................................  1 L

Ethylmethylketone / Methyl ethyl ketone ................................... 1 L

Acetone ....................................................................................   1 L

Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml

Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L

Resins, Top Coats and Gel Coats ................................................ 5 L

Paints ......................................................................................... 5 L

Styrene and MW Paraffin Solution .............................................. 5 L

_____________________________________________________________

If you have selected a product whose container size is considered ADR and you choose SEUR/DPD or GLS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR/DPD or GLS as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.

In any case, drums bigger than 25 kg must be shipped by TXT or DACHSER.

* Shippings to Portugal will be always carried by Torrestir

Score:  
 
Enrique Pons  -  
Perfecto para la creación de modelos Master, sobre todo con el soporte de Castro Composites.
Score:  
 
Enrique Pons  -  
Producto de primera para la realización de modelos Master, sobre todo con el respaldo de Castro Compostes.
Score:  
 
Carlos Mora  -  
Muy buen producto y muy buena atencion por parte del equipo de CastroComposites
Score:  
 
Jose Anton..  -  
No comments
Score:  
 
Miguel Ang..  -  
Nada que decir. Otro producto con buenos resultados y recomendable.

Customers who bought this product also bought:

MILLIFOAM® DIV80H Polyvinylchloride Foam (PVC)
Product available with different options
Home

MILLIFOAM® DIV80H-PF20 Polyvinylchloride Foam (PVC) for infusion

€26.65 €32.25 Tax incl. €26.65 Tax excl.
MILLIFOAM® DIV80H is a closed-cell, rigid polymer foam based on polyvinylchloride (PVC) chemistry. It offers excellent mechanical properties to low weight and is ideal for applications subjected to fatigue, slamming or impact loads. It is the foam of choice for marine, land transportation, wind energy, civil infrastructure and general indrustrial markets.
View
Product added to wishlist