Tax incl. Tax excl.
Diabreaker Resin Brake Line - Vacuum Channel
Diabreaker Resin Brake Line - Vacuum Channel - 2
Diabreaker Resin Brake Line - Vacuum Channel
Diabreaker Resin Brake Line - Vacuum Channel - 2

Diabreaker Resin Brake Line - Vacuum Channel

DIABREAKER100-1
5 Items
€5.46
€6.61 Tax incl. €5.46 Tax excl.
Tax excluded

No reward points for this product.

DIABREAKER is made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube, which delivers the vacuum all along the product.

Choose the type of supply

‎

 Calculate Shipping Cost
Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

DIABREAKER is made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube, which delivers the vacuum all along the product.

DIABREAKER avoids overconsumption of resin, by slowing down the resin as soon as the front gets into contact with it, while keeping the resin moving forward, and maintaining a good vacuum level.

DIABREAKER allows to drain entrapped air bubbles, to get fully infused fibers, and thanks to ELA20 release film, the product is easily peeled from the part, during demolding operation.

Main characteristics:

  • Color: Yellow/White
  • Release: Yes (yellow side)
  • Max. Serv. Temp.: 120°C
  • Thickness: 2 mm
  • Width: 100 mm
  • Weight: 60 gr/m

Storage:

To be stored in its original packaging, protected from direct sunlight and humidity.

Supply Type:

Diabreaker Resin Brake Line - Vacuum Channel x 1 m

Diabreaker Resin Brake Line - Vacuum Channel x 5m

Diabreaker Resin Brake Line - Vacuum Channel x 25m

5 Items
8431252543878

Customers who bought this product also bought:

610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide
Out-of-Stock
Home

610 g/m2 Biaxial Stitched Glass Fabric (+45°/-45°), S-TEX X-E -1270 mm wide

TVBX610
€7.90 €9.56 Tax incl. €7.90 Tax excl.
Biaxial glass fabric built of two layers of unidirectional fabric oriented at +45º and -45º respectively. Extensively used for han lay-up, injection or infusion and RTM . Suitable for any type of thermosetting resin like polyester, urethane-acrylate, vinyl ester or epoxy. Widely used for processes where a very good mechanical strength combined with...
View
Product added to wishlist