Tax incl. Tax excl.
Prepeg Carbon-Epoxy VTC401-UD100-T700-40%RW-300P
Prepeg Carbon-Epoxy VTC401-UD100-T700-40%RW-300P
Prepeg Carbon-Epoxy VTC401-UD100-T700-40%RW-300P
Prepeg Carbon-Epoxy VTC401-UD100-T700-40%RW-300P

Carbon-Epoxy Prepreg VTC401-UD300-HS-24K-37%RW-300P

SHD1022-300-1
0 Item
Out-of-Stock
€95.00
€114.95 Tax incl. €95.00 Tax excl.
Tax excluded

By buying this product you can collect up to 11 point points. Your cart will total 11 points that can be converted into a voucher of €1.10.

VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture.

Choose the type of supply

Ratings and comments from our customers
( 0.0 / 5) - 0 feedback(s)

Introduction

VTC401 is an epoxy resin system designed to give an initial cure at low temperatures or snap cure at high temperatures with enhanced toughness, honeycomb bondability and higher service temperature, giving greater flexibility in component manufacture. It can be supplied on a variety of fabrics in UD format to meet your cost and manufacturing requirements.

Typical applications: General purpose – Visual

Roll width: 300 mm

Aerial weight: 300 g/m2

Type of carbon yarn: unidirectional 24K HS (High Stregth)

Key Features & Benefits

  • Cure temperature from 65°C to 120°C
  • Service temperature up to 135°C after post cure
  • Low CTE and shrinkage
  • Work life at 20°C: 21 days
  • Storage life at -18°C: 12 months
  • Very low VOC content – no added solvents during manufacture

Snap cure available fot hot press moulding - consult us for details.

Type of supply

Prepeg Carbon-Epoxy VTC401-UD300-HS-24K-37%RW-300P x 1 m2, supplied rolled in cardboard box

Prepeg Carbon-Epoxy VTC401-UD300-HS-24K-37%RW-300P x 5 m2, supplied rolled in cardboard box

Prepeg Carbon-Epoxy VTC401-UD300-HS-24K-37%RW-300P x 25 m2, supplied rolled in cardboard box

Type
UD
Fire retardant
No
Width
30 cm
8431252539833

Customers who bought this product also bought:

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 300 g/m2, 125 cm wide
Fibre Reinforcements

XM600/300 Combi Mat 600 g/m2 Biaxial E-Glass Fabric (+45°/-45°) / Mat 300 g/m2, 125 cm...

XM600/300
€10.10 €12.22 Tax incl. €10.10 Tax excl.
Combi Mat Biaxial E-glass is ideal for laminates with polyester, vinyl ester and urethane-acrylate resins. Made with a 600 g/m2 biaxial glass fabric stitched to a 300 g/m2 emulsion chopped strand mat. Especially recommended as high performance structural reinforcement for large composite parts. Very used for the production of composite boats, windblades...
View
Product added to wishlist