Crestomer 1152 PA-Kleber auf Urethan-Acrylat
Beim Kauf dieses Artikels sammeln Sie
4
Punkte,.
Ihre heutige Bestellung umfasst dann 4
Punkte, welche in einen Gutschein mit folgendem Wert umgewandelt werden können:
0,40 €.
Crestomer 1152PA ist eine klebstoff - acrylat-urethan für hohe leistungen, ideal für die verklebung von vielen materialien: laminate aus polyester verstärkt mit faser - glas, holz, metall, etc.
![](/modules/estimateshippingcost/views/img/pts/loader.gif)
Crestomer 1152PA ist ein kleber auf urethan-acrylat-hohe leistung, ideal für die verklebung von vielen materialien: laminate aus polyester verstärkt mit faser - glas, holz, metall, etc.
Autorisiert vom RINA, Lloyd ' s Register of Shipping und Det Norske Veritas.
Sehr verwendet für das zusammenkleben der bauteile: rumpf/deck, schotten, etc. in boote.
Große bruchdehnung: ausgezeichnete schlagzähigkeit und dauerfestigkeit
Kaum präsentiert geruch.
Die verschiedenen zeiten von gel.
Seine geringe exothermie können stattfinden schweißnähte von bis zu 25 mm dicke.
Ausgezeichnete rheologie: schnelligkeit in der anwendung, leicht geglättet.
Eigenschaften und Vorteile
Basis von urethan-acrylat: ausgezeichnete haftung und hohe elonación zu bruch
Hoch thixotrope
Nicht standfest an senkrechten flächen
Excelennte beibehaltung der zähigkeit
Ausgezeichnete widerstandsfähigkeit gegen ermüdung und die auswirkungen
Verhalten der aushärtung und exotherme kontrolliert
Die oberflächengüte verbessert, indem nicht über übermäßige kontraktion
Zeit gel mit 2% - PMEC (Luperox K1S oder Butanox M50): 50 minuten
Schnur - klebstoff empfohlen: 1-25 mm
Netzteil typ
Crestomer 1152 PA x 1 kg, geliefert mit 20 g katalysator PMEC
Crestomer 1152 PA x 5 kg, geliefert mit 100 g katalysator PMEC
Crestomer 1152 PA x 25 kg, geliefert mit 0,5 kg katalysator PMEC
ADR (DANGEROUS GOODS)
Some products will be considered dangerous goods (ADR) when their container exceed certain amounts. ADR products must be transported by special transport agencies, such as DACHSER or TXT.
* The following products will be considered ADR (Dangerous Goods) when their container EXCEED the values shown in the table below. Products of equal or smaller size than those shown will not be considered ADR, so they may be transported also by SEUR/DPD and GLS.
____________________________________________________
PRODUCT
Polyvinyl and Isopropyl alcohol ................................................ 1 L
Ethylmethylketone / Methyl ethyl ketone ................................... 1 L
Acetone .................................................................................... 1 L
Methyl ethyl ketone Peroxide (X-8 MEKP Catalyst) ...................125 ml
Liquid Amine or Liquid Polyamide (Epoxy Resin Hardener) ....... 5 L
Resins, Top Coats and Gel Coats ................................................ 5 L
Paints ......................................................................................... 5 L
Styrene and MW Paraffin Solution .............................................. 5 L
_____________________________________________________________
If you have selected a product whose container size is considered ADR and you choose SEUR/DPD or GLS as carrier, those ADR products will be transferred into smaller containers to not breach the European Agreement concerning the International Carriage of Dangerous Goods by Road. That is, if you order a 25 kg resin drum and you select SEUR/DPD or GLS as carrier because you need the products sooner, the resin will be supplied in 5 containers of 5 kg each and its catalyst will be supplied in 5 containers of 100 g.
In any case, drums bigger than 25 kg must be shipped by TXT or DACHSER.
* Shippings to Portugal will be always carried by Torrestir
Vielleicht gefällt Ihnen auch